September 12, 2016: Aerospace Facilities Group, Inc. was awarded the contract to provide our GEN-3 Abrasive Blast Cabinet to Sheppard AFB. These cabinets will be going to the Air Force Corrosion Training Section at Naval Air Station Pensacola Florida.
The blast cabinet will be used to train new airmen coming into the field of corrosion control in the Air Force
August 29, 2016: Aerospace Facilities Group, Inc. was awarded a five-year maintenance contract at Moody AFB Georgia, to service and maintain the breathing air systems in support of the A-10 program at Moody AFB.
August 22, 2016: Aerospace Facilities Group, Inc. was awarded the contract to design and install a new compressed air system at Beale AFB. This system will be installed into the corrosion shop in support of the U-2 and Global Hawk program. The system consists of a new 100 HP screw compressor, refrigerant air dryer, ventilation system, inline filters, and new air piping.
August 18, 2016: Aerospace Facilities Group, Inc. was awarded the contract to supply Lackland AFB with our GEN-3 Abrasive Blast Cabinets. Lackland will be getting our GEN-3 blast cabinets with the ERGO kit option. The option includes a designed knee inset into the front of the cabinet allowing the operator to sit at the cabinet while blasting for long periods of time. The kit also includes and raised foot platform, padded arm/wrist rest, and our clear view option that keeps the window clear of dust while blasting.
August 15, 2016: Aerospace Facilities Group, Inc. manufactured these personnel air
showers for the US Navy at North Island. The workers are exposed to Hexavalent
Chromium on a daily basis while sanding, abrasive blasting, or painting Navy aircraft
and support equipment.
These air showers allow the workers to enter the booth and have the Hexavalent
Chromium dust blown off their work clothes. The dust is being removed from the booth
with a high-pressure ventilation blower/motor and through a two-stage filtration system
including a HEPA filter before the air is discharged back into the work area.
This system allows the workers to safely remove their work clothes to minimize the exposure
to the Hexavalent Chromium.
These showers were designed to be placed into the large paint booths and abrasive blasting
hangars and were designed and built to Class 1, Division 1 electrical code making them suitable
to be placed into an explosive environment.
1/3
May 16, 2016: Tinker AFB receives their GEN-3 Abrasive Blast Cabinets. The two blast cabinets with dust collectors were installed and put into operation last week.
May 15, 2016: U.S. Air Force Col. Stephen Jost, 20th Fighter Wing commander, gives a speech and thanks Aerospace Facilities Group during the opening ceremony of the 20th Equipment Maintenance Squadron’s newly renovated paint booth at Shaw Air Force Base, S.C., May 5, 2016. The paint booth will allow the 20th EMS to paint aircraft locally instead of sending jets to Hill AFB, Utah, and will save the 20th FW approximately $70,000 per aircraft.
May 11, 2016: Aerospace Facilities Group, Inc. was awarded the contract to maintain
and service the Pauli Systems abrasive blast equipment and C/O monitoring system at the
Naval Air Facility Joint Base Andrews. This five-year contract is for the preventive maintenance
on the Navy's walk-in Pauli Systems Abrasive Blast Booth and to calibrate the
C/O monitoring system.
May 05, 2016: Aerospace Facilities Group, Inc. just completed the F-16 Paint Booth project
at Shaw AFB and held the ribbon-cutting ceremony today for the base Wing Commander
and other dignitaries.
May 05, 2016: Aerospace Facilities Group, Inc. was awarded the contract at Tobyhanna Army
Depot to refurbish and rebuild their abrasive blast room facility.
April 22, 2016: Aerospace Facilities Group, Inc. was awarded a five-year maintenance
contract at Travis AFB to maintain all of the paint booths, sanding booths, composite booths,
abrasive blast equipment, and air compressors base-wide.
April 22, 2016: Aerospace Facilities Group, Inc. was awarded the contract at Travis
AFB to install a new 100hp rotary screw compressor in support of the Corrosion
Shop and Composite shop.
April 22, 2016: Aerospace Facilities Group, Inc. was awarded a five-year maintenance
contract to maintain all of the abrasive blast and paint booths at Barksdale AFB in support
of the B-52.
The contract covers their walk-in blast room, four-abrasive blast cabinets, paint booth,
dust collection systems, and breathing air systems.
January 09, 2016: Aerospace Facilities Group, Inc. was awarded the contract to supply
sanding booths to the US Navy at North Island San Diego CA. The Sanding Booths will be
used in support of the F-35 Flight Fabrication operations at North Island.
December 15, 2015: Aerospace Facilities Group, Inc. was awarded the contract to
maintain the aircraft sunshades at Creech Air Force Base North of Las Vegas. These
sunshades are used in the operation of the Reaper and Predator unmanned aircraft.
November 30, 2015: Aerospace Facilities Group, Inc. was awarded a five-year contract to
maintain the F-22 Alert Hangars at Nellis AFB in Las Vegas.
These hangars house the F-22 located at Nellis AFB used in the Red Flag training exercises.
November 23, 2015: Aerospace Facilities Group, Inc. was awarded the contract to design,
engineer, manufacture, and install six-decontamination air showers for the US Navy at
Fleet Readiness Center Southeast at North Island San Diego.
These air showers will be used by the USN artisans who work within the aircraft paint booths and abrasive blast booths to decontaminate their work clothing prior to exiting the hangars.
November 13, 2015: Aerospace Facilities Group, Inc. was awarded the contract to install a new breathing air system at Travis AFB Corrosion Shop to support the C-5 and C-17 operations.
This new system will supply grade "D" breathing air to operators in the paint booths, paint
mixing room, and abrasive blast booth.
November 6, 2015: Aerospace Facilities Group was awarded the contract to supply
Tinker AFB with two of our GEN-3 abrasive blast cabinets similar to the ones in the photos.
The contract also includes installation and training on the units.
October 15, 2015: Aerospace Facilities Group, Inc. was just awarded the contract
to design, engineer, manufacture, and install a Paint Booth, abrasive blasting equipment,
and breathing air system in support of the Corrosion Control Facility at Andersen AFB Guam.
September 30, 2015: Aerospace Facilities Group, Inc. was awarded the contract to maintain
and test the breathing air systems at Moody AFB. AFG will provide servicing of all the
compressors and quarterly air testing to ensure the units are producing grade "D" breathing air.
September 30, 2015: Aerospace Facilities Group, Inc. was awarded the contract to maintain
the fight line aircraft sunshade at Nellis AFB.
AFG will provide quarterly maintenance to all of the aircraft sunshades located at Nellis
AFB to ensure they are structurally sound and fully functional.
September 30, 2015: Aerospace Facilities Group, Inc. was awarded the contract to provide
monthly preventive maintenance to Eglin AFB Florida for the C-130 Paint Booth facility.
AFG will provide a monthly maintenance program to ensure the C-130 paint booth is fully
functional at all times.
September 30, 2015: Aerospace Facilities Group, Inc. was awarded the contract to design,
engineer, fabricate, and install a new Abrasive Blast Room for Maxwell AFB.
The abrasive blast room will consist of a new blast enclosure, full-floor media recovery, new dust collector, and abrasive blast generator incorporating our new PLC Micro-Flow media metering valve.
September 30, 2015: Aerospace Facilities Group, Inc. was just awarded the contract to completely rebuild the F-16 Paint Booth at Shaw AFB South Carolina.
The booth rebuild will consist of a new PLC control panel, heated air make-up units, exhaust fans, LED lighting, breathing air, compressed air, and filters.
This retrofit will bring the paint booth up to current standards and allow the warfighter to
continue their mission at Shaw AFB SC.
July 26, 2015: Aerospace Facilities Group, Inc. was just awarded the contract to install
a breathing air system for the US Air Force at Al Udeid Air Base in Qatar. This system will
provide grade "D" breathing air to the corrosion control shops, specifically to the new paint
booths, and abrasive blast booth we installed in June 2015.
July 26, 2015: Aerospace Facilities Group, Inc. was just awarded the contract for the
Connecticut Air National Guard (Bradley ANGB) to design, manufacture, and install a Paint Booth, Sanding Booth, Air Shower, and an Abrasive Blast Room in support of the new C-130 hangar
July 17, 2015: Aerospace Facilities Group, Inc. was just awarded a five-year maintenance
contract at Dyess AFB in Abilene, Texas to maintain the B-1 Bomber Paint Booth. This booth
is used for the maintenance of the specialized coatings on the Rockwell B-1.
July 15, 2015: Aerospace Facilities Group, Inc. welcomes Mr. Daniel Crume to the AFG team.
Daniel retired from the US Army after serving for 23 years. Daniel has been in the Abrasive
Blast and Paint Booth field for the last 13 years since retirement. Daniel will be heading
up our Field Service Division as a field service engineer.
July 15, 2015: Aerospace Facilities Group, Inc. was just awarded the contract at Whiteman
AFB to install a new paint booth at the Corrosion Control Facility in support of the B-2 Bomber.
July 15, 2015: Aerospace Facilities Group, Inc. sending Two GEN-3 XP (explosion-proof) Abrasive Blast Cabinets to Dyess AFB to be installed in the B-1 Bomber Paint Booth. These cabinets have been designed and built to be installed into an environment where explosive gasses may be present.
They also have our exclusive ergonomic kit installed which consists of a knee inset so the operator can be seated while using the machine. Raise foot treadle for cabinet operation, padded armrest, and ergo blast hose entry assist.
1/3
July 01, 2015: Aerospace Facilities Group was awarded the contract to design, manufacture, and install an Abrasive Blast Room and Paint Booth for the US Navy at China Lake Naval Weapons Center.
May 25, 2015: Aerospace Facilities Group was awarded the contract to change out the carbon filtration filters at the F-22 Paint Booth Facility at Elmendorf AFB Alaska.
May 21, 2015: US Air Force at Al Udeid AB using their new abrasive blast room from AFG.
May 21, 2015: Aerospace Facilities Group finished the installation of the two-paint booths and one abrasive blast room for the US Air Force at Al Udeid airbase Qatar. The base took possession of the equipment and immediately started putting them to work.
1/4
May 21, 2015: Aerospace Facilities Group was awarded the contract to supply two of our GEN-3 Abrasive Blast Cabinets to Dyess AFB in Texas. These cabinets will be explosive proof design suitable to be installed in an explosive environment.
May 08, 2015: Aerospace Facilities Group installing the new paint booth for the Patriot Missile repair facility at Hill AFB.
1/2
May 08, 2015: Aerospace Facilities Group Abrasive Blast Booth media recovery floor selector system installed for the US Air Force at Al Udeid Air Base in Qatar.
1/2
April 03, 2015: Aerospace Facilities Group making progress on the Corpus Christi Army Depot ACCF Helicopter Paint Booth Facility. Photos below showing the structural steel of the building going up and what the finished facility will look like.
1/4
Copyright © 2023 Aerospace Facilities Group, Inc. - All Rights Reserved.
Powered by GoDaddy